3/4-16 RIGHT HAND MALE CHROMOLY ROD END - TEFLON LINED3/4-16 RIGHT HAND MALE CHROMOLY ROD END - TEFLON LINEDExample of installation
Quantity Your Price
1-9 $87.41
10+ $78.67

AM12-T

3/4-16 RIGHT HAND MALE CHROMOLY ROD END - TEFLON LINED

Hole Diameter 3/4 in.
Ball Width 0.875 in.
14 Degrees of Misalignment
Radial Load Capacity 28,081 LBS
Teflon Liner is self lubricating

Increase quantity in your cart for additional savings.


The "A" series consists of a body, ball and race. This type of construction allows for the use of different metals for each component part. The body is manufactured out of 4130 steel alloy, which is heat treated, and zinc plated. Specifications for the race are heat treated alloy steel, zinc plated, and chromate treated materials. The ball is made from 52100 steel (AMS-7440) and is heat treated, and hard chrome plated.


Why a PTFE Liner?

The military spec Teflon race greatly increases dynamic wear characteristics, making this the ideal choice for 4-links and ladder bars. This PTFE lined option is not to be confused with other rod end manufacturers' soft Nylon races.


What is Radial Static Load Capacity?

These loads are based upon the minimal mechanical properties of the design configuration of the stressed areas. The Operation Load Capacity of Aurora rod ends is based upon the Radial Static Load Rating. Appropriate safety factors should be utilized with the application. Full rotation assemblies up to 100 rpm should not exceed 10% of the radial static load.


What is Axial Load Capacity?

Axial static load is the force that is applied through the bore of the ball. Maximum axial static load capacity is recommended at 15% of the radial static load for Aurora two piece rod ends, 10% for three piece rod ends.


What is Bearing Misalignment?

A rod end or spherical bearings ability to mis-align is measured by the degree of angle the ball can accommodate without interference.


Rod End: AM12-T
Degrees of Misalignment: 14°
R.H. Threads: 3/4-16
Thread Length: 1.75 in.
Width: 1.75 in.
Hole Diameter: 0.75 in.
Height to Centerline: 2.875 in.
Ball Width: 0.875 in.
Thickness: 0.687 in.
;