Right Hand Male Teflon Lined Chromoly Rod Ends

Image Part Number Description Price Unit
AM10-T AM10-T
5/8-18 RIGHT HAND MALE CHROMOLY ROD END - TEFLON LINED Hole Diameter 5/8 in.
Ball Width 0.750 in.
16 Degrees of Misalignment
Radial Load Capacity 17,955 LBS
Teflon Liner is self lubricating

Increase quantity in your cart for additional savings.
See Product Details
$62.98 Each
AM12-T AM12-T
3/4-16 RIGHT HAND MALE CHROMOLY ROD END - TEFLON LINED Hole Diameter 3/4 in.
Ball Width 0.875 in.
14 Degrees of Misalignment
Radial Load Capacity 28,081 LBS
Teflon Liner is self lubricating

Increase quantity in your cart for additional savings.
See Product Details
$87.41 Each
AM4-T AM4-T
1/4-28 RIGHT HAND MALE CHROMOLY ROD END - TEFLON LINED Hole Diameter 1/4 in. / Ball Width 0.375 in. / 16 Degrees of Misalignment / Radial Load Capacity 5260 LBS
Teflon Liner is self lubricating

Increase quantity in your cart for additional savings.
See Product Details
$31.64 Each
AM6-T AM6-T
3/8-24 RIGHT HAND MALE CHROMOLY ROD END - TEFLON LINED Hole Diameter 3/8 in.
Ball Width 0.500 in.
12 Degrees of Misalignment
Radial Load Capacity 9544 LBS
Teflon Liner is self lubricating

Increase quantity in your cart for additional savings.
See Product Details
$37.18 Each
AM7-T AM7-T
7/16-20 RIGHT HAND MALE CHROMOLY ROD END - TEFLON LINED Hole Diameter 7/16 in.
Ball Width 0.562 in.
14 Degrees of Misalignment
Radial Load Capacity 10,285 LBS
Teflon Liner is self lubricating

Increase quantity in your cart for additional savings.
See Product Details
$44.76 Each
AM8-T AM8-T
1/2-20 RIGHT HAND MALE CHROMOLY ROD END - TEFLON LINED Hole Diameter 1/2 in.
Ball Width 0.625 in.
12 Degrees of Misalignment
Radial Load Capacity 16,238 LBS
Teflon Liner is self lubricating

Increase quantity in your cart for additional savings.
See Product Details
$52.92 Each

Right Hand Male Teflon Lined Chromoly Rod Ends

The "A" series consists of a body, ball and race. This type of construction allows for the use of different metals for each component part. The body is manufactured out of 4130 steel alloy, which is heat treated, and zinc plated. Specifications for the race are heat treated alloy steel, zinc plated, and chromate treated materials. The ball is made from 52100 steel (AMS-7440) and is heat treated, and hard chrome plated.


What is Radial Static Load Capacity?

These loads are based upon the minimal mechanical properties of the design configuration of the stressed areas. The Operation Load Capacity of Aurora rod ends is based upon the Radial Static Load Rating. Appropriate safety factors should be utilized with the application. Full rotation assemblies up to 100 rpm should not exceed 10% of the radial static load.


What is Axial Load Capacity?

Axial static load is the force that is applied through the bore of the ball. Maximum axial static load capacity is recommended at 15% of the radial static load for Aurora two piece rod ends, 10% for three piece rod ends.


What is Bearing Misalignment?

A rod end or spherical bearings ability to mis-align is measured by the degree of angle the ball can accommodate without interference.


;