36 in. REAR WING F TIP PLATES36 in. REAR WING F TIP PLATESAssembled with billet CNC machined ribs.
Quantity Your Price
1 $643.99

C42-136-FT-8

36 in. REAR WING F TIP PLATES

8 in. Mount Tab Centerline
36 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA


Rear wings are built with CNC machined ribs and durable 0.032" thick aircraft aluminum skin using wind tunnel proven NACA wing profiles. Ribs have 15" chord length and wing is complete with internal reinforcement tubes. The ribs are not available separately. The 3/16" thick mount tabs have 3/8" diameter front and 5/16" diameter rear holes with 5-7/8" spacing. 

Tip plates are removable, interchangeable, and the profiles available are designed for equal performance. 

Proudly made in the USA.


Rear Wing Downforce & Drag Data
Attack Angle
50 MPH100 MPH150 MPH200 MPH

 
    
8° Attack AngleDownforce27.8lbs111.3lbs250.4lbs445.1lbs
Drag0.3 lbs
1.0 lbs
2.3 lbs4.1 lbs






10° Attack AngleDownforce32.4lbs129.5lbs291.5lbs517.9 lbs
Drag0.3 lbs
1.2 lbs2.7 lbs4.9 lbs






12° Attack AngleDownforce36.2 lbs144.6 lbs325.5 lbs104.7 lbs
Drag0.4 lbs
1.4 lbs3.2 lbs5.7 lbs

*Calculated values are based on ideal environmental conditions and 40" x 15" wing size


Customer Comments:

"I chose the Pro-werks wing for a number of reasons: infinite adjustability, high-quality constructions and hard data on angle of attack vs. pounds of downforce at known speeds.

From day one the jet truck was extremely stable. It had no 'lifting' of the rear end which is so common with jet trucks.
It's no BS...it works!"
             Dave Modder, Owner/Driver of The Dragon's Fyre Jet Truck



Rear Wing: C42-136-FT-8
Front To Hole Center: 2.75 in.
Mount Tab Centerline: 8.0 in.
Chord Length: 15.0 in.
Width: 36.0 in.
Rear Wing Tip Plate: C42-160-F
Length: 20.0 in.
Thickness: 0.93 in.
Height: 6.5 in.
Rear Wing Tab
Hole Diameter 0.375 in.
Center to Center 5.875 in.
Hole Diameter 0.312 in.
Thickness 0.187 in.
;