5/16-24 LEFT HAND 1/4 BALL MALE  HEAVY DUTY CHROMOLY ROD END5/16-24 LEFT HAND 1/4 BALL MALE  HEAVY DUTY CHROMOLY ROD ENDExample of installation
Quantity Your Price
1-9 $26.66
10+ $23.99

XAB4

5/16-24 LEFT HAND 1/4 BALL MALE HEAVY DUTY CHROMOLY ROD END

Hole Diameter 1/4 in. / Ball Width 0.375 in. / 13 Degrees of Misalignment / Radial Load Capacity 8452 LBS

Increase quantity in your cart for additional savings.

The "XA" Series rod ends feature large body and threaded shank with a standard size ball. Three piece construction, with body, ball and race. This type of construction allows for the use of different metals for each component part. The body is manufactured out of 4130 steel alloy, which is heat treated, and zinc plated. Specifications for the race are heat treated alloy steel, zinc plated, and chromate treated materials. The ball is made from 52100 steel (AMS-7440) and is heat treated, and hard chrome plated.


What is Radial Static Load Capacity?

These loads are based upon the minimal mechanical properties of the design configuration of the stressed areas. The Operation Load Capacity of Aurora rod ends is based upon the Radial Static Load Rating. Appropriate safety factors should be utilized with the application. Full rotation assemblies up to 100 rpm should not exceed 10% of the radial static load.


What is Axial Load Capacity?

Axial static load is the force that is applied through the bore of the ball. Maximum axial static load capacity is recommended at 15% of the radial static load for Aurora two piece rod ends, 10% for three piece rod ends.


What is Bearing Misalignment?

A rod end or spherical bearings ability to mis-align is measured by the degree of angle the ball can accommodate without interference.


Rod End: XAB4
Degrees of Misalignment: 13°
L.H. Threads: 5/16-24
Thread Length: 1.25 in.
Width: 0.875 in.
Hole Diameter: 0.25 in.
Height to Centerline: 1.875 in.
Ball Width: 0.375 in.
Thickness: 0.281 in.
;