This is a very handy unit that has many possibilities and is well suited when
a Pulling application is required.
The Pro-werks Silver Jacket Premium Tee Handle cable package
features a rigid Bulkhead mount on one end (3/8”-24 NF threads), with a bright
RED tee knob (¼-20 NC threads) and exposed 0.075” diameter solid wire on
the other end. The slender housing measures only 0.250” diameter, and is easily
routed through tight areas.
Popular uses include:
Fitted with efficient dynamic seals and requiring very little effort, these
lightweight cables have a full circle of reinforcement wires to protect and
support the inner liner, also providing positive load transfer with minimal
lost motion. And should be considered as an upgrade replacement for Teleflex Morse
Rated at 50# pull and 40# push, intermittent loads may exceed these ratings
considerably without failure. These recommended load ratings reflect a balance
between maximum load and reasonable cable life.
These aren’t a flimsy garden equipment control cable that will let you down
when you need it the most.
As the Silver Jacket name implies, these cables come in our trademark silver
color which compliments any color scheme.
This 20-ft. long cable can be cut on the exposed end, to the finished desired
length for your application.
Measuring Tip: To
determine the proper length for your application, measure the tip-to-tip cable
length by using a flexible rule to snake through the actual intended cable
See our Cable Hardware section for many mounting options, knobs, handles and
watch the Video to see them in action!
The Pro-Werks’ Silver Jacket Cables are proudly made in the USA.
Click here to view complete cable listing brochure (PDF)
Click here to view cable installation instructions (PDF)
Share with a friend