Rear wings are built with CNC machined ribs and durable 0.032" thick aircraft aluminum skin using wind tunnel proven NACA wing profiles. Ribs have 15" chord length and wing is complete with internal reinforcement tubes. The ribs are not available separately. The 3/16" thick mount tabs have 3/8" diameter front and 5/16" diameter rear holes with 5-7/8" spacing.
Tip plates are removable, interchangeable, and the profiles available are designed for equal performance.
Proudly made in the USA.
| Rear Wing Downforce & Drag Data |
| Attack Angle |
| 50 MPH | 100 MPH | 150 MPH | 200 MPH |
|
| | | | |
| 8° Attack Angle | Downforce | 27.8lbs | 111.3lbs | 250.4lbs | 445.1lbs |
| Drag | 0.3 lbs
| 1.0 lbs
| 2.3 lbs | 4.1 lbs |
|
|
|
|
|
|
| 10° Attack Angle | Downforce | 32.4lbs | 129.5lbs | 291.5lbs | 517.9 lbs |
| Drag | 0.3 lbs
| 1.2 lbs | 2.7 lbs | 4.9 lbs |
|
|
|
|
|
|
| 12° Attack Angle | Downforce | 36.2 lbs | 144.6 lbs | 325.5 lbs | 104.7 lbs |
| Drag | 0.4 lbs
| 1.4 lbs | 3.2 lbs | 5.7 lbs |
*Calculated values are based on ideal environmental conditions and 40" x 15" wing size
Customer Comments:
"I
chose the Pro-werks wing for a number of reasons: infinite
adjustability, high-quality constructions and hard data on angle of
attack vs. pounds of downforce at known speeds.
From day one the jet truck was extremely stable. It had no
'lifting' of the rear end which is so common with jet trucks. It's no BS...it
works!"
– Dave Modder, Owner/Driver of The Dragon's Fyre Jet Truck
Front To Hole Center:
2.75 in.
Mount Tab Centerline:
17.25 in.
Chord Length:
15.0 in.
Width:
44.0 in.
Length:
17.75 in.
Thickness:
0.093 in.
Height:
9.625 in.
Hole Diameter
0.375 in.
Center to Center
5.875 in.
Hole Diameter
0.312 in.
Thickness
0.187 in.