10-32 LEFT HAND FEMALE MILD STEEL ROD END
Quantity Your Price
1-9 $8.12
10+ $7.31

CG3

10-32 LEFT HAND FEMALE MILD STEEL ROD END

Hole Diameter 3/16 in.
Ball Width 0.312 in.
20 Degrees of Misalignment
Radial Load Capacity 2079 LBS

Increase quantity in your cart for additional savings.

The "C" Series consists of a low carbon steel body (zinc plated) and Alloy steel ball, heat treated and hard chrome plated. This construction allows the rod end body to carry a greater static load and offers greater misalignment capabilities.


What is Radial Static Load Capacity?

These loads are based upon the minimal mechanical properties of the design configuration of the stressed areas. The Operation Load Capacity of Aurora rod ends is based upon the Radial Static Load Rating. Appropriate safety factors should be utilized with the application. Full rotation assemblies up to 100 rpm should not exceed 10% of the radial static load.


What is Axial Load Capacity?

Axial static load is the force that is applied through the bore of the ball. Maximum axial static load capacity is recommended at 15% of the radial static load for Aurora two piece rod ends, 10% for three piece rod ends.


What is Bearing Misalignment?

A rod end or spherical bearings ability to mis-align is measured by the degree of angle the ball can accommodate without interference.


Rod End: CG3
Ball Width: 0.312 in.
Thickness: 0.234 in.
Degrees to Misalignment: 20°
0.5 in. Thread Depth
Width: 0.625 in.
Hole Diameter: 0.190 in.
Height to Centerline: 1.062 in.
Flats: 0.312 in.
L.H. Threads: 10-32
Diameter: 0.406 in.
;