The Pro-Werks SILVER JACKET Premium 33 series chute cable has a clip type mount with a 10-32 NF threaded rod on one end and an exposed 0.075 " solid wire on the other end. This allows it to be easily cut to the desired length. The housing measures .325" diameter.
Positive, smooth operating SILVER JACKET Premium cables are fitted with efficient dynamic seals, and should be considered as an upgrade replacement for Teleflex Morse type cables. A full circle of reinforcement wires protect and support the inner
liner, resulting in minimal deflection during cable operation. The complete unit is lightweight, but this
isn't your flimsy garden variety cable that will let you down when you need it the most. You can count on Pro-werks to do it right.
This Solid Wire core unit is primarily intended parachute releases, but it may be used for other applications such as throttle linkages, or fuel shut-offs if desired. You will also like the Silver housing as it is neutral, and compliments any color combination. So you look good too!
Rated at 50# pull and 40# push, intermittent loads may exceed these
ratings considerably without failure. These recommended load ratings
reflect a balance between maximum load and reasonable cable life.
To determine the proper length for your application, measure the cable length by using a flexible rule to snake through the actual intended cable route.
Two sizes are available to choose from, final overall length maybe altered by cutting the exposed wire end if required.
Order by overall length (tip to tip).
The Pro-Werks SILVER JACKET Cables are proudly made in the USA.
Click here to view complete cable listing brochure (PDF)
Click here to view cable installation instructions (PDF)
Share with a friend